BED HYDRAULICALLY OPERATED WITH TREND

Description

Features

Hydraulic bed, 4-section, 3 of which jointed and 1 fixed centrally. Mattress platform made of thermoformed ABS, easy to be removed and cleaned, with round edges and integrated mattress stoppers. Base frame of epoxy-coated steel pipes to be equipped with wheels.
The bed intermediate frame of epoxy-coated steel pipes supporting the mattress platform can host either, swing-down, sliding-rail or 4 section safety sides; on both sides of the intermediate frame there is an accessory/drainage-holder metal bar with 4 mobile sliding plastic hooks, each one with a 3 kg capacity. Frame provided with proper housings for patient lifting pole and I.V. poles at the 4 corners.
Plastic bumper wheels protect the four corners of the bed.
During adjustment, the roto-translating backrest automatically shifts backwards to compensate patient pressure on the mattress: this allows to avoid continuous repositioning of the patient on the bed , to reduce the pressure on the plexus/pelvis areas to enhance breathing and to make the patient
posture significantly more comfortable. By roto-translation the backrest shifts 11 cm backwards.
Height adjustment performed by foot -operated hydraulic actuator with pedals on both sides of the bed, for a maximum lifting load of 220 kg.
Trendelenburg and Reverse Trendelenburg adjustments are controlled by a mechanical safety device, servo-assisted by a gas spring.
Backrest and footrest can be adjusted by gas springs controls with gradual release, hand-operated by levers located on both sides of the bed.
The footrest area is manually adjustable through teeth racks and features a mechanical safety control to avoid incorrect angles/counter rotations of the knee.
The bed ends are embedded in dedicated receptacles with a safety lock preventing pulling-away, that can be unlocked by small levers integrated in the structure
Epoxy powders coating finish, with antibacterial additive BioCote, based on silver ions, enhancing sanitising.